RO Module
Our reverse osmosis module consists of a high-pressure pump, an energy recovery device, a membrane housing, and membrane element. It’s just that all these parts are not separated, but in one unit, very compact and without a single pipe or tube. No need to synchronize anything. Just switch it on and get fresh water. A single module produces 30 m3 of fresh water per day. And if you need more, the modules may be interconnected. Two, four, or let’s say twelve. 60, 120, or 360 m 3 /day.
Benefits:
- High-pressure pump with an internal energy recovery device
- Modular system, each RO module can work together or independently
- Ultra-compactness with relatively high productivity
- Simplicity in assembling and servicing
- No need for costly high-pressure tubes and flowmeters
- Energy consumption is up to 65% lower in comparison with RO systems without energy recovery
- The efficiency of energy recovery exceeds 95%
- The high corrosion resistance of every part thanks to Duplex, Superduplex, and PEEK
RO module 30-1-DB8SW030
Seawater RO module, 30 cubic meter per day
Pump features:
Model: APPR 43. Max outlet pressure: 70 bar, inlet pressure: 0.5-5 bar. Flow: 3.3 m3/h.
Electromotors: 4 kW; 1500 rpm.
RO membranes:
SW 8040, 1 pcs.
RO module 60-2-DB8SW030
Seawater RO module, 60 cubic meter per day
Pump features:
Model: APPR 43, 2 pcs. Max outlet pressure: 70 bar, inlet pressure: 0.5-5 bar. Flow: 3.3 m3/h.
Electromotors: 4 kW; 1500 rpm.
RO membranes:
SW 8040, 2 pcs.
RO module 90-3-DB8SW030
Seawater RO module, 90 cubic meter per day
Pump features:
Model: APPR 43, 3 pcs. Max outlet pressure: 70 bar, inlet pressure: 0.5-5 bar. Flow: 3.3 m3/h
Electromotors: 4 kW; 1500 rpm
RO membranes:
SW 8040, 3 pcs
.